From 0944172a26ad0974043d2bf2fb9d0dd36c96b19f Mon Sep 17 00:00:00 2001 From: Konstantin Aladyshev Date: Mon, 5 Sep 2022 17:35:00 +0300 Subject: Add VPD PCD lesson Signed-off-by: Konstantin Aladyshev --- Lessons_uncategorized/Lesson_PCD_VPD/README.md | 392 +++++++++++++++++++++++++ 1 file changed, 392 insertions(+) create mode 100644 Lessons_uncategorized/Lesson_PCD_VPD/README.md (limited to 'Lessons_uncategorized/Lesson_PCD_VPD') diff --git a/Lessons_uncategorized/Lesson_PCD_VPD/README.md b/Lessons_uncategorized/Lesson_PCD_VPD/README.md new file mode 100644 index 0000000..b50df9c --- /dev/null +++ b/Lessons_uncategorized/Lesson_PCD_VPD/README.md @@ -0,0 +1,392 @@ +In this lesson we are going to look at the last Dynamic PCD storage method - `VPD`. + +VPD stands for "Vital Product Data". In this context it is a read-only file in the firmware image which contains VPD PCDs. + +To mark dynamic PCDs as VPD PCDs, you have to list them under `[PcdsDynamicVpd]`/`[PcdsDynamicExVpd]` sections in the DSC file. The format of the PCDs of this kind looks like this: +``` +.|[||] +``` + +For example add this override for the PCDs from the `PCDLesson` application to the `OvmfPkg/OvmfPkgX64.dsc` file: +``` +[PcdsDynamicVpd] + gUefiLessonsPkgTokenSpaceGuid.PcdDynamicInt32|7|0x44444444 + +[PcdsDynamicExVpd] + gUefiLessonsPkgTokenSpaceGuid.PcdDynamicExInt32|16|0x55555555 +``` + +If you'll try to build OVMF as-is, you would encounter build failure: +``` +$ build --platform=OvmfPkg/OvmfPkgX64.dsc --arch=X64 --buildtarget=RELEASE --tagname=GCC5 + +... + +build.py... + : error 000E: Fail to find third-party BPDG tool to process VPD PCDs. BPDG Guid tool need to be defined in tools_def.txt and VPD_TOOL_GUID need to be provided in DSC file. +``` + +This is happening because the tool for read-only VPD file creation is not set. The EDKII has one such tool included in itself - it is BPDG tool. It is already defined in the `Conf/tools_def.txt` file: +``` +################## +# BPDG tool definitions +################## +*_*_*_VPDTOOL_PATH = BPDG +*_*_*_VPDTOOL_GUID = 8C3D856A-9BE6-468E-850A-24F7A8D38E08 +``` +The tool `VPDTOOL` is a Python module from the folder [`BaseTools/Source/Python/BPDG/`](https://github.com/tianocore/edk2/blob/master/BaseTools/Source/Python/BPDG/) which is used via [`BaseTools/BinWrappers/PosixLike/BPDG`](https://github.com/tianocore/edk2/blob/master/BaseTools/BinWrappers/PosixLike/BPDG) wrapper on Linux. As a wrapper folder `BaseTools/BinWrappers/PosixLike` gets added to the environment `PATH` variable after the `. edksetup.sh` command, we can simply declare path for `VPDTOOL` as `BPDG`. You can check this application in your build environment: +``` +$ BPDG +Please specify the filename.txt file which contain the VPD pcd info! +BPDG options -o Filename.bin -m Filename.map Filename.txt +Copyright (c) 2010 - 2018, Intel Corporation All Rights Reserved. + + Intel(r) Binary Product Data Generation Tool (Intel(r) BPDG) + +Required Flags: + -o BIN_FILENAME, --vpd-filename=BIN_FILENAME + Specify the file name for the VPD binary file + -m FILENAME, --map-filename=FILENAME + Generate file name for consumption during the build that contains + the mapping of Pcd name, offset, datum size and value derived + from the input file and any automatic calculations. +``` + +If we want to create VPD file we need to add a special define `VPD_TOOL_GUID` to the DSC `[Defines]` section. This define determines a tool which would be used for the VPD generation. Let's use the aforemetioned `BPDG` tool for this. Add this code to the `OvmfPkg/OvmfPkgX64.dsc` file: +``` +[Defines] + ... + VPD_TOOL_GUID = 8C3D856A-9BE6-468E-850A-24F7A8D38E08 +``` + +The used GUID corresponds to the GUID of the tool `VPDTOOL` defined in the `Conf/tools_def.txt` + +Now the OVMF build should succeed. + +Check out PCD Database file with the `parse_pcd_db` application: +``` +$ parse_pcd_db \ + --peidb "Build/OvmfX64/RELEASE_GCC5/X64/MdeModulePkg/Universal/PCD/Pei/Pcd/OUTPUT/PEIPcdDataBase.raw" \ + --dxedb "Build/OvmfX64/RELEASE_GCC5/X64/MdeModulePkg/Universal/PCD/Dxe/Pcd/OUTPUT/DXEPcdDataBase.raw" + +... + +38: +Token type = VPD +Datum type = UINT32 +VPD offset = 0x00000007 (=7) +Size = 4 +Provide VPD file to print actual data + +... + +42: +Token type = VPD +Datum type = UINT32 +DynamicEx Token = 0xaf35f3b2 +DynamicEx GUID = 150cab53-ad47-4385-b5ddbcfc76bacaf0 [gUefiLessonsPkgTokenSpaceGuid] +VPD offset = 0x00000010 (=16) +Size = 4 +Provide VPD file to print actual data +``` + +As you can see the actual PCD values are not encoded in the PCD Database itself. The database PCD records contain only the offsets to the VPD file. The VPD itself created as a separate binary in a build folder. You can check it with the `hexdump` and see that it contains PCD values: +``` +$ hexdump -C Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin +00000000 00 00 00 00 00 00 00 44 44 44 44 00 00 00 00 00 |.......DDDD.....| +00000010 55 55 55 55 |UUUU| +00000014 +``` + +`parse_pcd_db` application supports setting the VPD file via the command line: +``` +$ parse_pcd_db \ + --peidb "Build/OvmfX64/RELEASE_GCC5/X64/MdeModulePkg/Universal/PCD/Pei/Pcd/OUTPUT/PEIPcdDataBase.raw" \ + --dxedb "Build/OvmfX64/RELEASE_GCC5/X64/MdeModulePkg/Universal/PCD/Dxe/Pcd/OUTPUT/DXEPcdDataBase.raw" \ + --vpd Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin + +... + +38: +Token type = VPD +Datum type = UINT32 +VPD offset = 0x00000007 (=7) +Value: +0x44444444 (=1145324612) + +... + +42: +Token type = VPD +Datum type = UINT32 +DynamicEx Token = 0xaf35f3b2 +DynamicEx GUID = 150cab53-ad47-4385-b5ddbcfc76bacaf0 [gUefiLessonsPkgTokenSpaceGuid] +VPD offset = 0x00000010 (=16) + +tum type = UINT32 +VPD offset = 0x00000007 (=7) +Size = 4 +Provide VPD file to print actual data +0x55555555 (=1431655765) +``` + +# PCD Database access to the VPD data + +Let's see how PCD Database driver gets VPD PCD data. Here is a code snippet from the [https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Universal/PCD/Dxe/Service.c](https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Universal/PCD/Dxe/Service.c) file: +```cpp +VOID * +GetWorker ( + IN UINTN TokenNumber, + IN UINTN GetSize + ) +{ + ... + switch (LocalTokenNumber & PCD_TYPE_ALL_SET) { + case PCD_TYPE_VPD: + ... + RetPtr = (VOID *)(mVpdBaseAddress + VpdHead->Offset); + break; + + ... +} +``` + +In this case `VpdHead->Offset` is an offset that is aquired from the PCD Database file. The `mVpdBaseAddress` variable is a start address of the VPD file in memory. This variable is set in the module initialization code [https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Universal/PCD/Dxe/Pcd.c](https://github.com/tianocore/edk2/blob/master/MdeModulePkg/Universal/PCD/Dxe/Pcd.c): +```cpp +EFI_STATUS +EFIAPI +PcdDxeInit ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + ... + + // + // Cache VpdBaseAddress in entry point for the following usage. + // + + // + // PcdVpdBaseAddress64 is DynamicEx PCD only. So, DxePcdGet64Ex() is used to get its value. + // + mVpdBaseAddress = (UINTN)DxePcdGet64Ex (&gEfiMdeModulePkgTokenSpaceGuid, PcdToken (PcdVpdBaseAddress64)); + if (mVpdBaseAddress == 0) { + // + // PcdVpdBaseAddress64 is not set, get value from PcdVpdBaseAddress. + // + mVpdBaseAddress = (UINTN)PcdGet32 (PcdVpdBaseAddress); + } + + ... +} +``` + +As you see, the start address of the VPD file in memory is set via PCDs: `PcdVpdBaseAddress` or `PcdVpdBaseAddress64`. These PCDs are declared in the `MdeModulePkg/MdeModulePkg.dec`: +``` +[PcdsFixedAtBuild, PcdsPatchableInModule] + ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress + # to store PCD value. + # @Prompt VPD base address. + gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010 + + ... + +[PcdsDynamicEx] + ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64 + # to store PCD value. It will be DynamicExDefault only. + # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is + # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase. + # It can't depend on EFI variable service, and can't be DynamicExHii PCD. + # @Prompt 64bit VPD base address. + gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006 +``` + +So if we want our VPD PCDs to work correctly we need to embed VPD file in the flash image and set any of these PCDs for its address. + +# Embed VPD file to the flash image + +Let's look how `OvmfPkg/OvmfPkgX64.fdf` file describes `OVMF.fd` image: +``` +[FD.OVMF] +BaseAddress = $(FW_BASE_ADDRESS) +Size = $(FW_SIZE) +ErasePolarity = 1 +BlockSize = $(BLOCK_SIZE) +NumBlocks = $(FW_BLOCKS) + +!include VarStore.fdf.inc + +$(VARS_SIZE)|$(FVMAIN_SIZE) +FV = FVMAIN_COMPACT + +$(SECFV_OFFSET)|$(SECFV_SIZE) +FV = SECFV +``` + +You can look up the size/offset defines in the `OvmfPkg/OvmfPkgDefines.fdf.inc` file. Here are all 3 regions of the `OVMF.fd` image with their respective sizes: +``` +VARS region (0x000000..0x084000) +FVMAIN_COMPACT region (0x084000..0x3CC000) +SECFV region (0x3CC000..0x400000) +``` + +Let's substract 4KB (4096=0x1000) region from the `FVMAIN_COMPACT` part and dedicate it for the VPD file: +``` +VARS region (0x000000..0x084000) +VPD region (0x084000..0x085000) +FVMAIN_COMPACT region (0x085000..0x3CC000) +SECFV region (0x3CC000..0x400000) +``` + +For this make the following modifications to the `OvmfPkg/OvmfPkgDefines.fdf.inc` file: +``` +!if $(FD_SIZE_IN_KB) == 4096 +... +-DEFINE FVMAIN_SIZE = 0x00348000 ++DEFINE FVMAIN_SIZE = 0x00347000 ++DEFINE VPD_SIZE = 0x1000 +... +!endif +``` + +And modify `OvmfPkg/OvmfPkgX64.fdf` code like this: +``` + +[FD.OVMF] +BaseAddress = $(FW_BASE_ADDRESS) +Size = $(FW_SIZE) +ErasePolarity = 1 +BlockSize = $(BLOCK_SIZE) +NumBlocks = $(FW_BLOCKS) + +!include VarStore.fdf.inc + +$(VARS_SIZE)|$(VPD_SIZE) +gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress +FILE = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin + +($(VARS_SIZE)+$(VPD_SIZE))|$(FVMAIN_SIZE) +FV = FVMAIN_COMPACT + +$(SECFV_OFFSET)|$(SECFV_SIZE) +FV = SECFV +``` + +As you already know the build system will automatically set the `gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress` PCD for the PCD Database. With it the VPD PCDs should work correctly. + +# `PCDLesson` + +For the test let's again use our `PCDLesson` application. + +It has the following code for the Dynamic/DynamicEx PCDs test: +```cpp +if (PcdToken(PcdDynamicInt32)) { + Print(L"PcdDynamicInt32=0x%x\n", PcdGet32(PcdDynamicInt32)); + Status = PcdSet32S(PcdDynamicInt32, 0xBEEFBEEF); + Print(L"Status=%r\n", Status); + Print(L"PcdDynamicInt32=0x%x\n", PcdGet32(PcdDynamicInt32)); +} else { + Print(L"PcdDynamicInt32 token is unassigned\n"); +} + +Print(L"PcdDynamicExInt32=0x%x\n", PcdGetEx32(&gUefiLessonsPkgTokenSpaceGuid, PcdDynamicExInt32)); + +PcdSetEx32S(&gUefiLessonsPkgTokenSpaceGuid, PcdDynamicExInt32, 0x77777777); +Print(L"Status=%r\n", Status); +Print(L"PcdDynamicExInt32=0x%x\n", PcdGetEx32(&gUefiLessonsPkgTokenSpaceGuid, PcdDynamicExInt32)); +``` + +As we've modified `OVMF.fd` FDF code, rebuild OVMF and launch QEMU with the updated `OVMF.fd` image: +``` +$ qemu-system-x86_64 \ + -drive if=pflash,format=raw,file=Build/OvmfX64/RELEASE_GCC5/FV/OVMF.fd \ + -drive format=raw,file=fat:rw:~/UEFI_disk \ + -net none \ + -nographic +``` + +Check the `PCDLesson` output: +``` +FS0:\> PCDLesson.efi +... +PcdDynamicInt32=0x44444444 +Status=Invalid Parameter +PcdDynamicInt32=0x44444444 +PcdDynamicExInt32=0x55555555 +Status=Invalid Parameter +PcdDynamicExInt32=0x55555555 +``` + +So as you can see the values from the VPD file are getted correctly. And read-only mechanics also works. It is not possible to set the VPD PCDs. + +# Additional syntax for PCD statements + +It is possible to use `*` in place of a `VPD offset`. This way the PCD would start just after the one before it. For example check this code: +``` +[PcdsDynamicVpd] + gUefiLessonsPkgTokenSpaceGuid.PcdDynamicInt32|7|0x44444444 + +[PcdsDynamicExVpd] + gUefiLessonsPkgTokenSpaceGuid.PcdDynamicExInt32|*|0x55555555 +``` +Rebuild OVMF and use `hexdump` on the VPD file: +``` +$ hexdump -C Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin +00000000 00 00 00 00 00 00 00 44 44 44 44 55 55 55 55 |.......DDDDUUUU| +0000000f +``` + +Another possibility is to not override the PCD value in the DSC. This way the PCD would get its value from the DEC/INF file. For example: +``` +[PcdsDynamicVpd] + gUefiLessonsPkgTokenSpaceGuid.PcdDynamicInt32|7 + +[PcdsDynamicExVpd] + gUefiLessonsPkgTokenSpaceGuid.PcdDynamicExInt32|*|0x55555555 +``` + +Once again rebuild OVMF and use `hexdump` on the VPD file to verify the functionality: +``` +$ hexdump -C Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin +00000000 00 00 00 00 00 00 00 fe ca fe ca 55 55 55 55 |...........UUUU| +0000000f +``` + +# `*.txt` and `*.map` files + +Besides the VPD `*.bin` file the build system also creates `*.txt` and `*.map` files: +``` +$ find Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08* +Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin +Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.map +Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.txt +``` + +Here is the content of these files for the last example. + +The `*.txt` contains the final values for the PCDs (notice `0xCAFECAFE` for the `PcdDynamicInt32`): +``` +$ cat Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.txt +... +# This file lists all VPD informations for a platform collected by build.exe. +... +gUefiLessonsPkgTokenSpaceGuid.PcdDynamicExInt32|DEFAULT|*|4|0x55555555 +gUefiLessonsPkgTokenSpaceGuid.PcdDynamicInt32|DEFAULT|7|4|0xCAFECAFE +``` + +And the `*.map` also contains calculated offset for all the PCDs: +``` +$ cat Build/OvmfX64/RELEASE_GCC5/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.map +... +# This file lists all VPD informations for a platform fixed/adjusted by BPDG tool. +... +gUefiLessonsPkgTokenSpaceGuid.PcdDynamicInt32 | DEFAULT | 7 | 4 | 0xCAFECAFE +gUefiLessonsPkgTokenSpaceGuid.PcdDynamicExInt32 | DEFAULT | 0xb | 4 | 0x55555555 +``` + +# Links + +[EDK II Build System Output File Format](https://edk2-docs.gitbook.io/edk-ii-dsc-specification/appendix_d_vpd_data_files/d1_edk_ii_build_system_output_file_format) + +[GUIDed Tools and PCD VPD Data](https://edk2-docs.gitbook.io/edk-ii-build-specification/7_build_environment/73_guided_tools) + -- cgit v1.2.3-18-g5258